IP Address: Fix Wireless Router Troubleshooting [Tips & Tricks]

By | May 27, 2017 IP Address: Fix Wireless Router Troubleshooting [Tips & Tricks]

The router is an essential part of every house, office, multinational company, hospitals, clinics, etc. Without wireless internet the day becomes slow and most certainly, you will miss to catch up with your deadlines. A malfunctioned router is one of the most frustrating problems when your internet service provider tells you that the connection has no problem and then you realize your router has a problem. There are different brands which have a wide range of different types of routers. It is okay if you do not have adequate knowledge of all the routers in the market. Every router has a different set of tips and tricks but they do not differ vividly. They are almost similar to each other. When the router stops working, there are some things that you can actually do yourself. Sometimes the users have to take it to the authorized service center only if the problem is not fixed with the simple techniques. Below are few steps mentioned in that you can implement so that the router starts to function properly. Let us look at a few instructions to fix your home wireless router.


  • Checking with the internet service provider


Firstly, it is important to contact the internet service provider before you do anything to your router. This is to make sure if there is any problem with the internet connection. If that is the case then, none of the tips and tricks you do to the router will work. So, make sure you contact the service provider before following any steps given below.


  • Try restarting the home wireless router


To start, let us look at the most basic step that almost everyone does at the first instance when the electronic appliance stops working. While doing this, make sure that all the wires are connected to the designated ports. Also, see that the router is receiving electrical power.


  • Connect with the computer for troubleshooting


You can then connect your wireless router to your personal computer and check for troubleshooting steps. The computer will diagnose the problems if there are any with the router. The main cause can be an outdated driver or an uninstallation of the driver. You can update your driver software, you might be able to solve this problem.


  • Know your home wireless router properly


It is very important to know the type and the job of your router. Do a deep survey about the router, and then you should buy it. It becomes necessary to know every part of your router. You should know which switch does what job and which port should have which wire. This knowledge will help you when the router malfunctions. You can also call the call center of the brand. The company representatives will guide you definitely but for that, you need to have adequate basic knowledge of the device.


  • Reset the home wireless router


This is the last thing that you would want to do. You will have set a password for your router which would now be reset. Basically, you will have to configure your router all over again after you have performed this step. Resetting the router will bring it back to its original configuration that you had received from the company. If you want to reset your router, follow the given steps.

  1. The reset button is located on the rear side of the router. Once you have located the button press for around 10 seconds.
  2. This will give you a blinking light on the device.
  3. After 10 seconds, your home wireless router will be reset to the factory configuration. You will now have to set the password and other essentials again.

These are some tips and tricks that you can follow if at all your router malfunctions. You can also use your warranty if you still have it to replace your router or get it repaired for free.


Leave a Reply

Your email address will not be published. Required fields are marked *