Featured Article IP Address Router Login | How to Access IP Address Router Login: Before we get to into the detailed discussion about a router access, let us first get acquainted with the function of a router As we all know, it provides with an internet access, but how? It forwards data packets along two network points and is located at gateways. These data packets are forwarded from router to router through the internetwork till the destination is not reached. When a data packet is sent in one line, the router functionally reads the address information set in the packet and accordingly distributes the information to the destination. An overlay network is thus formed as the data packets get transferred from one network to another according to the routing policy. IP Address is a private IP Address, hence ranging across a small distance reserved by IANA for domestic use.

Configuring a Router IP Address Router Admin and Login:

  • The router is connected by a fiber cable to the data source of the internet work. The internet is accessible the user automatically from the router without any activity. Only one user can access the router internet.
  • The static IP Address( IP Address) needs to be configured manually to access the internet. Only the admin can set the range and the user limit for the required speed.
  • After turning off the modem, the router and the computer connect the modem cable to the WAN Port of the router via an Ethernet cable. Now, connect the computer to the LAN port of the router and watch whether the LEDs of the LAN and WAN ports are up. Accordingly, power is the modern, the router and lastly the computer. IP Address Router Login IP Address Router Login

Step 1:

The web interface of the router needs to be logged into for the management.

Step 2:

Now, the WAN connection type needs to be configured. After logging into the router, click Network and then WAN on the menu. Provide the IP Address supplied by the ISP and the click on save. Your router has been successfully configured.

How to login as Admin ( IP Address): is a private IP Address and this IP Address can only be accessed by IPv4 users and not by IPv6 users. This IP address is the default IP Address for a large number of routers connected and wireless modems. This IP Address is more or less used by modern and private routers used for domestic use. So basically when you login to the web page of the router when you type the IP Address, a message notification would pop up to confirm the user and the password. Input the name of the user as “Administrator” and enter the password. Then click on okay. then u can easily access the IP Address

When you forget password:

When a new router is purchased, a default Username and Password is provided to configure the router to start the activity efficiently. Now, if you forget the password, what to do? Simply factory defaults the router settings and configure it again. Always remember that the moment you default the factory settings all your previous data gets deleted.

Step 1: Turn of the router.

Step 2: Use a pointed pin or a needle to reset the router. Press the button and hold for 5 seconds. Next, turn on the router without releasing the reset button keeping it held for more 5-10 seconds after the router has been turned on.

Step 3: Now wait for the device to reboot after you have let go of the reset button.

Step 4: Next, connect the router to the computer via an Ethernet cable through the LAN port or by using a Wi-Fi connection.

Important points to remember For IP Address Router Login:

  • Power on the router until it restarts completely.
  • Enter your default username as “administrator”.
  • Make sure the IP Address of the computer and the router are under the same subnet of and the default setting of the gateway should be same with the router’s IP Address.


Follow these instructions to configure your router and access IP Address Internet network without any hindrance. if you still have any doubts regarding IP Address Router Login do comment below. we will clarify all your doubts. Router Login, Guide for Admin & Password Router Login: Among all the default gateways, IP Address is the most commonly used IP Address for nearly 75% of the wireless routers and ASDL modems. What is IP Address? – IP (Internet Protocol) address is the default address to identify a computer among all the others on the Network. Let’s discuss accessing 168.192.11 and how to change the password, etc. Router Login Guide:

The login of cannot be accessed if you are typing this address manually in your browser page. Instead, you will get an error message with a delay of 30 seconds indicating that “This site cannot be loaded”. Then how is it possible to access

Accessing ip:

This IP Address cannot be accessed by anyone, as this is a mistyped IP. The original IP is If this IP Address once entered manually in the browser page, you will be directed to the login page of So once the page is displayed, enter your login as admin and also your password.

What is Router Login:

The router is something which connects your node with the network. This router comes with optical fiber wires (or some other standard wires) thus providing high-speed network connections. Thus with a router is available an IP address which is used to connect with the network. Nowadays routers come up with a default IP address which is In order to login into your router, this IP address is used as the login name.

After the installation procedures of the router, open the router application (i.e) Router Login Page. Enter the Username and Password thereby connecting your node to the network. There is a possibility to mistype 1 by I which is the most common error the users will do always.

Forget your Router’s Username and Password:

  • If the Username or Password of the router is not changed at least once, with the help of the router packed box, try to find out your router’s serial number first and then its login address next.
  • If you have already changed your router’s Username as well as password, and now you have forgotten it, it’s simple just reset your router or your modem to the default factory settings.
  • There will be always a hidden button in your wireless router or modem, just hold the button for nearly 10 seconds, automatically the router’s Username and Password will be changed to the factory settings.

If you want to change the IP address, go to the router’s configuration page and then,

  • Go to the LAN host settings (depending upon the router, the words will get changed (i.e) LAN host settings).
  • Go to the address reservation section in that LAN host settings.
  • Once you find out, you can easily assign the permanent IP address.


If internet connection of ip is to be used in workplaces or home, router or modem is the must to be get connected with. With the Username and password of the router (i.e) Router Login, a node can be connected to the network. It has default factory settings which can be then replaced according to user’s wish for security purposes.

192.168.l.1 IP Login Admin Password Guide

192.168.l.1 IP Login: 192.168.l.1 is a very important IP while networking through any standard router or standard ADSL modem. The 192 series IP’s form the backbone of the network through most routers. The 192 series is assigned to most routers which are then assigned to each user. The 192 series IPs lie from to Out of which 192.168.l.1 is a very important IP address. This IP particularly is assigned to a router’s admin portal. With this IP and the right credentials, anyone can take control of a particular router. Here we give a detailed 192.168.l.1 IP Login Admin Password Usage Feb 2017.

192.168.l.1 IP Login Admin Password Guide:

In Feb 2017, one of the IPs that most users were unable to access from their systems was the IP 192.168.l.1. The users who were unable to access the above-mentioned IP address also reported that while the IP 192.168.l.1 was not responsive when they tried to access it directly through their browsers, it showed up just fine as a Google search result of the term “192.168.l.1”.

Now, this is a rather strange problem, in most cases 192.168.l.1 points directly to the router. It is almost like the router’s home page. This is important because it signifies that if 192.168.l.1 was down or there was a problem with the router at the other end then none of the other pages would have opened or the Google search result would have turned up fine. Hence the problem that was reported in Feb 2017 by the users was rather strange and uncommon.

Therefore, we conclude that the problem must have been somewhere else and here we have made an attempt to provide a workaround for such a problematic situation. The necessary solutions to the reportedly inaccessible IP might lie in the IP itself. Before entering the IP address in the address bar, check it very carefully for the real IP, in this case, is and not 192.168.L.1. Users entering 192.168.L.1, or 192.168.l.1 and not were thus unable to access this IP. While this could be a possible reason for the Google search turning out to be just fine, the wrong IP, in this case, won’t be accessible making it difficult to access this tutorial.

192.168.l.1 IP Login Guide For Easy Login:

Many users also mistype this IP as 192.168.l.l or 192.168.L.L which also makes the router effectively inaccessible. To avoid such errors and inconveniences for the users in the future, the proper input of the IP is recommended. Typos of the IP address may be one of the main reasons why the users were unable to access the desired IP in Feb 2017.

We hereby declare that the correct IP is

Another problem that the users reported regarding 192.168.l.1 is the lack of any logical suggestion in the Google auto-suggest list. Most of the time, the Google auto suggest feature actually suggests the wrong IP, which makes the users more prone to making such mistakes. While Google can be trusted and 99% of the time it has given correct search results, some users have faced these problems and it is thus advised to get the IP correct irrespective of what the Google auto-suggestion might suggest. With these precautions taken the IP access failure rates are expected to decrease.

192.168.I0.1 Admin Login & Password Changing Guide

192.168.I0.1 Admin Login: One can easily identify the different types and brands of Wi-Fi routers available in the market. Some of them are suitable for domestic uses and some for the commercial purpose. However, the configuration is necessary irrespective of the type or use of the Wi-Fi routers. How a router can be configured, depends solely on your router (But not, what type is it). Before commencing the configuration process, you must know the IP address or the internet protocol address (which, here, is 192.168.I0.1). You can access the configuration window of your Router if and only if you know the IP address of it. You may call your internet service provider for the IP address. know how to login into 192.168.I0.1 from here

The Configuration Window of 192.168.I0.1 Admin Login:

Configuration Window of 192.168.I0.1  is easy Now, you have the IP address. Type it in the address bar and there you go, you have the configuration window in front of you. Now you are all set to configure your Wi-Fi router, but before that, you must be sure about few things like- whether it is a domestically used router or is it used for commercial purposes? If your router is domestically used then Voila, You can configure it pretty quickly. If it is used commercially, then it would be a little tricky to configure as many devices would be connected to the same network. You need to know- what is a dynamic connection and what is a static connection? Once you know a thing or two about these, you are all set to proceed as mentioned below. Caution! Do not try to hurry with the steps or to jump any of those, else you will end up with something ferocious.

Steps to change the password of 192.168.I0.1 Admin Login:

  • Enter the correct IP address in the address bar. If you end up entering the wrong IP address then Alas! You cannot have access to your router’s configuration window. So, make sure the IP address you are about to enter is all correct.
  • So now, as you have entered the correct IP address, hit “Enter.” Thumbs up! You are on the page that contains each and every info and settings of your router. However, for that, you need to enter the login Id and password. If it is your first time or you have not changed it since you bought your router, then usually the login Id and password are set as ‘admin’ and ‘admin’ respectively. Else, if you have changed them earlier, enter the last password and login Id you got.
  • If you logged in successfully, you could see a “DHCP” option on the screen. So, finally, you have the key that leads you to change your password, change the name of your router and many other settings. This DHCP thing is the whole wizard.
  • Now, if you have, on your screen, the option to set a new password you need to be careful. You need to set a strong password. Some passwords contain only alphabets, some are alphanumeric, and some allow special characters too. Choose a strong password for your Wi-Fi router and you are done. Your router is configured and is safe against hacking (at least, to some extent!).


Read the above-written steps carefully and perform them in order, else you may run into some trouble. Please, do not try to hurry through the steps. Make sure each step is performed correctly then only move on to the next. Moreover, after all, choose a strong password for your router. IP Address: Fix Wireless Router Troubleshooting [Tips & Tricks] IP Address: Fix Wireless Router Troubleshooting [Tips & Tricks]

The router is an essential part of every house, office, multinational company, hospitals, clinics, etc. Without wireless internet the day becomes slow and most certainly, you will miss to catch up with your deadlines. A malfunctioned router is one of the most frustrating problems when your internet service provider tells you that the connection has no problem and then you realize your router has a problem. There are different brands which have a wide range of different types of routers. It is okay if you do not have adequate knowledge of all the routers in the market. Every router has a different set of tips and tricks but they do not differ vividly. They are almost similar to each other. When the router stops working, there are some things that you can actually do yourself. Sometimes the users have to take it to the authorized service center only if the problem is not fixed with the simple techniques. Below are few steps mentioned in that you can implement so that the router starts to function properly. Let us look at a few instructions to fix your home wireless router.


  • Checking with the internet service provider


Firstly, it is important to contact the internet service provider before you do anything to your router. This is to make sure if there is any problem with the internet connection. If that is the case then, none of the tips and tricks you do to the router will work. So, make sure you contact the service provider before following any steps given below.


  • Try restarting the home wireless router


To start, let us look at the most basic step that almost everyone does at the first instance when the electronic appliance stops working. While doing this, make sure that all the wires are connected to the designated ports. Also, see that the router is receiving electrical power.


  • Connect with the computer for troubleshooting


You can then connect your wireless router to your personal computer and check for troubleshooting steps. The computer will diagnose the problems if there are any with the router. The main cause can be an outdated driver or an uninstallation of the driver. You can update your driver software, you might be able to solve this problem.


  • Know your home wireless router properly


It is very important to know the type and the job of your router. Do a deep survey about the router, and then you should buy it. It becomes necessary to know every part of your router. You should know which switch does what job and which port should have which wire. This knowledge will help you when the router malfunctions. You can also call the call center of the brand. The company representatives will guide you definitely but for that, you need to have adequate basic knowledge of the device.


  • Reset the home wireless router


This is the last thing that you would want to do. You will have set a password for your router which would now be reset. Basically, you will have to configure your router all over again after you have performed this step. Resetting the router will bring it back to its original configuration that you had received from the company. If you want to reset your router, follow the given steps.

  1. The reset button is located on the rear side of the router. Once you have located the button press for around 10 seconds.
  2. This will give you a blinking light on the device.
  3. After 10 seconds, your home wireless router will be reset to the factory configuration. You will now have to set the password and other essentials again.

These are some tips and tricks that you can follow if at all your router malfunctions. You can also use your warranty if you still have it to replace your router or get it repaired for free.


Improving WiFI Connection Performance TIPS


A good WiFi connection is very important in the modern day. Everyone has some or the other work online that requires a good internet connection. There are ways to improve your existing internet connection.There are few configurations that can be done to WiFi router that will help improve connection.

Transmit Power

Transmit power is defined as the power used by the WiFi router to transmit a signal. A router is generally supposed to operate at 100 percent transmit power. This means that the router is using full power and it is hence able to provide the entire house/office area with Wi-Fi connection. But sometimes it becomes necessary to restrict the Wi-Fi connection to a particular area within the home/office. In such cases, we need to isolate some frequencies of waves. To do this, we can change the transmit power rating to 75% or 50% or 25%.

Transmit Channel

A transmit channel of 2.4 gigahertz (band) is used by the 802.11 workgroups. Many channels are derived from this one single band. Every country has its own rules regarding channels that can be allowed, frequency range levels and maximum power. Some operators will use higher power for very long-distance wireless communication.


Wireless Multimedia Extensions (WME) also called  Wi-Fi Multimedia (WMM) is defined as the subset of 802.11e wireless LAN that performs the task of prioritizing audio, video, voice etc. over other less important things. There are four Access Categories (AC) namely, video, voice, background and best effort. WMM uses these four items to prioritize the data packets in the queue. WMM makes use of Quality of service (QoS) to put the applications that require better performance in the queue with higher priority. Latency or delay before transferring data over a network and jitter is minimized when WMM is enabled.

IGMP Snooping

IGMP stands for Internet Group Management Protocol. IGMP is a network protocol that generates traffic. This means that there is a sort of conversation between the host devices and the routers. IGMP snooping feature helps the network switches to listen to this conversation. The network switch uses the information that it has heard to maintain a map of links that are in need of IP multicast streams. This helps to handle traffic efficiently by making sure that only those ports which need a particular traffic will be able to receive it. Many routers use the IGMP to multicast effectively. Multicasting refers to the transmission of identical data like multimedia to a large number of receivers.

Short GI

GI stands for guard interval. Guard Intervals prevent different transmissions from interfering with each other. If one has a short GI, such that the interval is lowered to around 400 nanoseconds, then the data rate increases by approximately eleven percent. It is extremely suitable for office environments

WLAN Partition

The clients of a wireless connection that associated with each other must not communicate with each other directly. WLAN partition is a feature which prevents this when enabled

Coexistence of HT20/40

In HT20 mode, the channel bandwidth is 20 MHz and in HT40 mode it is 40 MHZ. When this feature is enabled, interference between neighboring devices is prevented. When this feature is disabled, connection speed increases.

Configuring the Router

In the ‘advanced’ tab of the router, make a selection of ‘advanced wireless’. Then enable/ disable the above-mentioned features to suit your needs.

Channel changing

The software ‘WIFI Optimizer’ for Android or ‘WIFI Radar’ for Linux must be used to find out which channel is used less in the neighborhood and then transmit channel must be changed


Prioritize the features that you want in your WiFi connection. Use this information to enable or disable properly. Make sure to not disable or unable wrong features that could negatively affect the Wi-Fi connection. Ip Address Router Admin Login Password Change Guide

About Router: Ip address Router Login: Among various IP address available, is one of the best IP address which is reserved for private network. It is a class A IP address. This address is used by the factories making routers as their router’s default gateway address. While comparing it with public IP addresses which requires to be unique throughout the entire internet, requires to be unique only in its own local area network. This IP address is very convenient to setup your own local area network such as company’s local network, school’s local network, etc. ip address Routers are comparatively more used in business computer network than in home networks. It has a ping utility which determines how much each device is active on the internet. Some brand routers such as Cisco and Infinity have IP address as default. This router is used just to connect devices which are in the same local area and not devices over the internet. ip Address Router Login:

The steps to login to router are as follows

  • In order to login to the router, start the PC or Laptop which is connected to the network. If the device is not connected to the network, use the cable provided with the router to connect the router with the device.
  • Open the web browser on your PC or Laptop. Enter the website as in the address bar and press enter key.
  • The Login page will appear. You will be required to enter username and password which is usually provided at the back of the router.
  • If the username and password is not provided anywhere on the router, then try admin as username and password which is set as default for Router Login & Password Change Guide for many routers. IP Address Router Login and Password Change Guide:

There are many ways in which the username and password of the Ip router can be changed depending upon various router providers. But the most preferable way to change the settings of the network is as follows

  1. Once you login to the router page, you are required to look through all the menus and pages and find connection option.
  2. Under connection option, select Wi-Fi. You will see the name of your Wi-Fi network.
  3. Select the name of your Wi-Fi. Then, click on the edit option available at the right side.
  4. The dialog box with heading manage your Wi-Fi network settings will appear. In this dialog box, you can see your Wi-Fi network name, mode, security mode, network password, etc.
  5. If you want to change the network name and password, you can change the name and password of the network in this dialog box.
  6. After changing the username and password of the Wi-Fi network, click on Save Settings option in order to save and apply the changes. Otherwise, the settings will not change.
  7. Once you save the settings, all your devices connected to the Wi-Fi network will get disconnected.
  8. You would have to connect the devices again with the Wi-Fi network using new password in order to get services from the network.


This is the process of Ip Address Router Login Password. if you are facing any problems or if you have doubts regarding Ip Router Login or  Password do comment below. we will solve all your doubts through comments. thanks for reading the article. have a nice day.

How to setup a Virtual Server on your WiFi Router (NAT)

What is a virtual server?

A Virtual Server is a server that shares hardware and software resources with other systems. A virtual server acts as a link between devices connected on a local area network and the devices on a wide area network that is the internet. It is very as it allows devices to collect more data. Many offices today are using local area networks to stay connected to all devices in the office, but a virtual server gives them the opportunity to connect with other devices too. follow this guide to setup Virtual Server on your WiFi Router

How does it work?

A NAT router takes up a single IP address and all the other devices are given sub-IP addresses. This means that virtually all the devices have the same IP address. When a user on the external internet tries to access this IP address it has to be forwarded through the NAT. This is where a virtual server is required. A virtual server directs these requests from the external internet onto particular ports. Ports help in accessing the files. It helps in keeping the data on the network safe as only a specific set of individuals are allowed to connect to the private network. check how does Virtual Server on your WiFi Router works.

What is a port?

A port is different for all WiFi routers. The details regarding the port are provided in the program settings. In simple terms, Ports are holes in the firewall which allow external devices to connect to the server. The port numbers are different for all routers but the steps to set up a virtual server are similar.

Step by step set up of a virtual server:

For reference we will be using an Archer C9, other routers have a similar approach

Step 1 Log in

Log in and use the web interface of the router.

Step 2

After accessing the web interface, you will see a series a menu options on the upper right side where one of the options will be Advanced.

After clicking on advanced, there will be an option on the left Nat Forwarding. Follow it by clicking Virtual Server. There will be an option on the right top corner saying Add. Click it.

Step 3

Click on the option saying View Existing Server. Out of the options in the menu, select http. All the other information required in all other boxes will be automatically filled as soon as http is selected. follow all these steps and  easily setup Virtual Server on your WiFi Router

Follow it up by entering the PC’s IP address.

Note: If you have to choose a service which is not there on the existing servers, you can do it by manually adding the port number of the router which is found in its program settings. All other parameters have to be entered manually too. The number of virtual servers is not limited and can be set up as per requirement,

Step 4 the users on the internet

The users on the internet have to go to the following address.


The words IP address of computer are to be replaced by the actual IP address of the computer.

This is how the computers on the internet can connect to a local area network.

What are the advantages of a virtual server?


Virtual servers are four times more efficient that nonvirtual servers. This means that less hardware is required for work. Hardware reduction is a goal for all offices. Hardware reduction means less capital investment, a decrease in storage space requirement, and less maintenance cost. All of which lead to cost reduction

Faster server deployment:

Virtual servers can be easily replicated. Thus the time it takes to set up a new server is less as compared to the nonvirtual servers. Setting up virtual servers is easy and the applications of virtual servers are endless. this is the way to setup Virtual Server on your WiFi Router